All You Need To Know About A Furnace Repair

The winters in Yuba City are cold and damp. And if your furnace doesn’t work in top condition during the harsh winter months, it will cause your family a lot of discomforts. Therefore, it is always a good idea to get it repaired before the winter months. Professional technicians are trained to handle various issues relating to furnace repair in Yuba City, CA.

Signs that indicate the need for furnace repair

If your furnace needs repair, there will be some obvious signs to watch out for. They are as follows:

  • General discomfort in the house

Poor functioning of the furnace can cause you to feel either too hot or too cold inside your house. Some culprits can be a blocked filter, a loose belt, or an impaired fan motor.

  • High Power Costs

The proper functioning of a furnace is echoed in its rate of energy consumption. An unreasonable spike in energy bills can indicate malfunctioning of the furnace.

  •  Leakage of Gas

Gas leakage from your furnace can be hazardous to you and your family’s health. 

Basic Troubleshooting

 It is not necessary that all kinds of furnace repair have to be done by professionals. Homeowners can perform some simple troubleshooting that can solve the issues. Let’s discuss some of these steps:

  •  Examine the Furnace Filters

Examine the air filters to see if they are clogged. Congested air filters can deplete the air quality and restrict airflow. You can easily clean the air filters to remove the blockage.

  • Examine the Thermostat

Check the thermostat settings to make sure they are set correctly. Batteries should be changed when needed.

  • Inspect the Switch Panel

The electric panel should be regularly checked. The tripping of the breaker can cause the furnace to turn off. Fuses should be replaced in case they are damaged.

  • Check the Pilot Light

For the furnace to work, the pilot light as well as the furnace flame should be on. If it is not so, you should refer to the user manual before trying to relight it. Instructions should be followed carefully. Shut down the system if there is a leak and call a technician.

  • Check the Vents

Ensure that all the vents and registers are open and unobstructed. A furnace cannot produce enough heat in the house if they are open or blocked for some reason.

Common Defects in Furnaces

Some common faults that are encountered in furnaces are as follows: 

  • Impaired Blower Belt

A damaged blower belt can cause your furnace to emit a shrill squealing noise. This warrants the replacement of the blower belt.

  •  Strained Bearings

Strained ball bearings can lead to an annoying scraping noise when the furnace is switched on. They should be replaced by an HVAC technician.

  • Short Cycling

The frequent turning on and off of your furnace is known as short cycling. This might indicate either an issue in the thermostat or a blocked filter.

  • Yellow Pilot Light

Ensure that the pilot light burns blue with a yellow tip. A yellow flame can indicate high levels of carbon monoxide in the furnace. It is advisable to call a technician.

  • Damaged Heat Exchanger

A weird smell in the house accompanied by rusting, soot, and cracks in the furnace can suggest a damaged heat exchanger. It is suggested to get it replaced by a technician.

Vardell’s AC is a great option to choose if you are looking for furnace repair in Yuba City CA. We provide premier air conditioning and heating services for both residential and commercial purposes. Our technicians are well trained to serve you with the best quality repair.